Jiangyin Bosj Science & Technology Co., Ltd.
Professional Roll Forming Machine Manufacturer
Add to Cart
Steel Silo Roll Forming Machine Production Craft
2 Steel Silo Machine Working Condition
2.1
2.1.1 Operation area:20X 5.0 X 8(length X width X height)m
2.1.2 The direction of feeding: from left to right
2.1.3 Power: 380V, 50Hz, 3 parch
2.1.4 Total Power:about 265kw
2.2 Main technical data
2.2.1 Width of material sheet:1145 mm
2.2.2 Thickness of material sheet:3~7mm
2.2.3 Low carbon steel,galvanized sheet,cold steel,etc
2.2.4 Working piece length:≤6000 mm
2.3 Main Machine Technical Parameters
| 10T hydraulic decoiler | |
| Steel coil width | from 1250 mm to 1500 mm |
| Internal diameter of coil | variable, from 470 mm to 620 mm |
| Coil placement in the coil holder | hydraulic hoist |
| Maximum coil weight | 10000 Kg |
| Working speed | 0-15m/min adjustable |
| Maximal out diameter | 1600mm |
| Main motor power | 7.5KW AC motor |
| Hydraulic power | 5.5kw |
| Forming Section | |
| Material of the profile | 195-235Mpa GI or carbon steel |
| Thickness range | 3.0-4.0mm |
| Main motor power | 60kw, AC motor, motor inside of main machine |
| Roll station | 20stations (according the final design) |
| Shaft diameter | ￠150mm |
| Machine roll forming speed | not less than 18 meters per minute |
| Transmission | by gear box 200*500 |
| Auto stacker and transmission table | |
| Take the sheet by air compressor, 5.5KW( provide by customer) | |
| Air cylinder swing arm size | 40mmx80mm |
| Transmission power | 4kw AC motor |
| Stacker length in 12m, transmission table length in 25m | |
| Drive of transmission | by 1.0inch double line chain |
| Transmission roller | ASTM1045 with chrome, diameter of roller is in 80mm |
| Carrying capacity | maximal 5000Kg |
| Length of capacity | 500-12000mm |
| The maximal stacker height | 300mm |
| 3 Station Curving Machine | |
| Thickness | 3-4mm |
| Maximal feeding width | 1000mm |
| Roll speed | 0—10m/min |
| Main power | 30KW |
| Roll station | 3 stations |
| Shaft material | 45# forge steel, polished and coated with chrome |
| Diameter of shaft | 180mm |
| Material of roller | Gcr15 steel, polished and with HRC58-62° |
| Adjust angle motor power | 3KW |
| Dimension of machine | 2000 mm×1200 mm×1300 mm |
| Drive | by gear box |
| Curving mode | horizontal |
| Curving diameter | ≥800mm |