Jiangyin Bosj Science & Technology Co., Ltd.
Professional Roll Forming Machine Manufacturer
Add to Cart
Worthy Buying Formwork Construction Materials Perforated Concrete Scaffolding Catwalk Roll Former
BOSJ OFFER Related Products
The details of the scaffolding machine
| NO. | CONTENTS | |
| 1 | Scaffolding plank standing tube welding device | |
| 2 | Scaffolding plank ledger welding device | |
3 |
Punching Device |
Full automatic punching device |
| Semi-automatic punching device | ||
| Manual punching device | ||
| Spare part:punching mould | ||
4 |
diagonal brace flattening &punching device |
Full automatic diagonal brace flattening &punching device |
| Semi automatic diagonal brace flattening &punching device | ||
| Manual diagonal brace flattening &punching device | ||
| Spare part:punching mould | ||
5 |
Tube cutting machine |
Auto Blade cutting Device |
| Swing saw cutting device | ||
| Direct saw cutting device | ||
| Auto direct saw cutting device | ||
| 6 | Auto Scaffolding plank wedling line | Auto robot welding |
| Auto robot hand welding | ||
| 7 | Base jack & U-head jack welding device | |
| 8 | Auto scaffolding plank roll forming machine | |
1. Technique parameters of the processing line
(1) Plate Material: Galvanized plate/strip steel
(2) Thickness of the plate : 1.5-2mm(different thickness is ok)
(3) Machine body :350mm H steel
(3) Wall thickness of the main forming machine: 18mm steel plate
(4) Outside debugging to change sizes
(5) Transmission chain : 2’’
(7) Reducer :15kw Xingxing Cycloid which works stably and no noise.
(8) Seam type semi-mat
(9) Roller material: GCr15 with quenched treatment 62-64°C
(10) Rollers: 16 steps including 9 shafts for leveling.
(11) 4 steps side wheels on the coil-input part for avoiding coil-deviation
(12) Forming part adopts side wheel rotation forming to reduce friction between rollers and coil. Easy and fast debugging
(13) Diameter of active shaft: 80mm, 45# steel
(14) Hydraulic pump power: 7.5KW
(15) PLC control systerm with inverter
(16) Woking Speed: 8-12m/min
3,5 Main Roll Forming machine
1, Working speed :2-8 m/min
2, Material thickness :1.0-1.2mm
3, Control system:PLC
4, Decoiler :5T
5, Punching :one set
6, Main roll forming rollers:16row rollers
7, Roll material:GCR15 Steel after quenching process HRC58-62℃,he chrome plating surface treatment
8, Material of the shaft and the shaft diameter:45# steel processing, shaft diameter is 70mm
9, Main machine power :18.5kw
10 Hydraulic station power:5.5kw
11, Hydraulic pressure:24Mpa
12, Scissors punching material:Cr12Mov,Quenching HRC 58-62℃
13, Length tolerance:3m±1.0mm
14, Voltage :380V, 50HZ,3 phrase
15,d riving mode :chain driving mode
16, Machine size :16.5*2.2*1.6m
Technical Parameter
|
Description |
Offered Specification |
| Rolling speed | 12-15m/min |
| Rolling thickness | 1.5mm-2.0mm |
| Raw material | Galvanized steel or blank steel |
| Roller stations | About 20 stations |
| Roller material | Gcr15, Quench HRC58-62 Plated Chrome |
| Shaft diameter | Φ76mm |
| Transmission | Gearbox |
| Material of chain | 45# Advanced Steel (Diameter: 76mm), thermal refining |
| Material of cutting | Cr12Mov with quench HRC58-62° |
| Tolerance | 10m+-0.5mm |
| Hydraulic station | 5.5kw |
Main Machine Parameter
| No. | Item | Unit | Data | Remark | |
1 |
Raw material | Type | MSgalvanized sheet | ||
| Strength of panel | Map | ≥350 | |||
| Thickness of panel | mm | 1.2~2.0 | |||
| 2 | Size | mm | See figure | ||
| 3 | Speed | m/min | 6~8 | ||
| 4 | Material of roller | GCr15Hardening treatment | |||
| 5 | Drive type | Gear box | |||
| 6 | Total power | kw | About 45 | ||
| 7 | Electrical system | PLC Inverter control | |||
| 8 | Contour dimension(L*W*H) | m | 35X4X3.9 | ||